A label that tells your story.
LML7001
Thermal Transfer Printable Polypropylene Laminate – Linered
Description: – 2 mil clear BOPP is a topcoated, heat set, biaxally oriented, co-extruded polypropylene film with excellent clarity. The surface has been modified for improved ink adhesion. This product has excellent moisture resistance and good die cutting and dispensing characteristics.
Use – Parts and product ID, WIP labels, nameplate, graphics used on appliances, industrial equipment, tools, any place that a label needs to be Chemical, Solvent, Salt and abrasion resistant.
Material Specification
| Material | value |
|---|---|
|
Substrate: |
Polyester Film |
|
Color: |
Gloss Clear |
|
Liner: |
50# Semi-Bleached Kraft |
|
Top-coat: |
Flexographic |
|
Film: |
2.0 Mil |
|
Adhesive: |
0.7 Mil |
|
Liner: |
3.1 Mil |
|
Total: |
5.8 Mil |
Adhesive Specifications
| Characteristics | Value |
|---|---|
|
Characteristics: |
Permanent |
|
Performance Characteristics: |
Mild Cleaners, Detergents, Alcohol, Moisture, Cold, Chemical, and Abrasion Resistant |
|
Surfaces: |
Metals, Polypropylene, Glass, HDPE, LDPE, Many label substrates |
Shelf Life: 12 months at 70 Deg. F ( 21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7003
Clear TTR Polyester Laminate
Description – 2 Mil clear, ink-receptive polyester film with a pressure sensitive adhesive is designed to protect printed information from abrasion, oils, chemicals and solvents on many label substrates.
Use – Perfect by itself for printing clear labels, decals and nameplates. Can also be used as over-laminate to protect labels that will be exposed to moisture, chemicals, solvents, oils, abrasion and other harsh environments Recognized for UL 969 component labels. This product is UL Recognized and CSA Accepted for indoor and outdoor use UL file #MH8212.
Material Specification
| Materials | Value |
|---|---|
|
Substrate: |
Polyester Film |
|
Color: |
Gloss, Clear |
|
Liner: |
50# Semi-Bleached Kraft |
|
Top-coat: |
Flexographic |
|
Film: |
2.0 Mil
|
|
Adhesive: |
0.7 Mil |
|
Liner: |
3.1 Mil |
|
Total: |
5.8 Mil |
Adhesive Specifications
| Characteristics: | Value |
|---|---|
|
Characteristics: |
Pressure Sensitive, Permanent |
|
Surfaces: |
Wide variety of surfaces including low surface energy polyolefins. |
Shelf Life: 12 months at 70 Deg. F ( 21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7004
Self-Wound Over-Laminate
Description – 1 mil clear polypropylene, silicone release coated, over-laminating film provides an excellent solvent and abrasion resistant finish to labels. Perfect for use on Image-Tek Protector Series 5 Printer Laminator.
Use – Parts and product id, WIP labels, nameplates, graphics used on appliances, industrial equipment, tools, any place that a label needs to be Chemical, Solvent, Salt and abrasion resistant. All products conform to 21CFR177-1520 for indirect food contact.
Material Specification
| Materials | Value |
|---|---|
|
Substrate: |
Polypropylene BOPP Over-laminate |
|
Color: |
Gloss, Clear |
|
Top-coat: |
Not top-coated for printing |
|
Film: |
1.1 Mil |
|
Adhesive: |
1.0 Mil |
|
Liner: |
Self-wound material – No liner |
|
Total: |
2.1 Mil |
Adhesive Specifications
| Characteristics | Value |
|---|---|
|
Characteristics: |
Permanent |
|
Performance Characteristics: |
Mild Cleaners, Detergents, Alcohol, Moisture, Cold, Chemical, and Abrasion Resistant |
|
Surfaces: |
Metals, Polypropylene, Glass, HDPE, LDPE, Many label substrates |
Shelf Life: 6 months at 70 Deg. F ( 21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7006
Matte Clear Polyester
Description – 92 Mil matte polyester film, treated for smooth, controlled unwind, featuring a high grade emulsion acrylic adhesive system. The matte film is dimensionally stable and exhibits excellent resistance to moisture, chemicals, acids, alkali’s, oil, sunlight, weathering and aging.
Uses – Name Plates, Rating Plate labels and product identification.
Material Specification
| Materials | Value |
|---|---|
|
Characteristics: |
Permanent |
|
Color: |
Matte, Clear |
|
Film: |
.92 Mil |
|
Adhesive: |
0.5 Mil
|
|
Total: |
1.42 Mil |
Adhesive Specifications
Characteristics:Self-Wound
Shelf Life: :2 years at 70 F (21 C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7007
Self-Wound Polyester Over Laminate
Description: – 1 mil clear UL/CSA polyester, over-laminating film treated with a non-silicone release for smooth controlled unwind, and features a high grade emulsion acrylic adhesive system. It meets a high standard of optical clarity after laminating. It is dimensionally stable and exhibits excellent resistance to moisture, chemicals, acids, alkali’s, oil, sunlight, weathering and aging. Recognized and listed by UL under sections “UL969 & CSA-C22.2” as an over-laminate for labels. This product meets requirements for DIRECT FACE contact of 21 CFR 177.1630 and the incidental and indirect edge or seam contact specification for FDA files: 21 CFR 175.105. It provides excellent an excellent solvent and abrasion resistant finish to labels.
Use: – Less costly alternative to linered UL/CSA Recognized polyester laminates. LML7007 is suitable for indoor and outdoor applications. Suitable for use where exposed to high humidity or occasionally exposed to water; also, for occasional exposure to lubricating oil. This material is for ideal for compliance labels and prime labels.
Material Specification
| Materials | Value |
|---|---|
|
Substrate: |
Polyester Over-laminate |
|
Color: |
Gloss, Clear |
|
Top-coat: |
Not top-coated for printing |
|
Film: |
1.0 Mil |
|
Adhesive: |
0.5 Mil |
|
Liner: |
Self-wound material – No liner |
|
Total: |
1.5 Mil |
Adhesive Specifications
| Characteristics | Value |
|---|---|
|
Characteristics: |
Permanent |
|
Performance Characteristics: |
Mild Cleaners, Detergents, Alcohol, Moisture, Cold, Chemical, and Abrasion Resistant |
|
Surfaces: |
Many label substrates |
Shelf Life: 6 months at 70 Deg. F ( 21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7008
Thermal Transfer Printable Laminate Polyester Linered
Description: – 1 mil clear Polyester TC is top-coated and highly transparent. It features excellent tear strength, heat resistance, dimensionally stable and chemical resistant. Print treatment is designed to enhance printability with a variety of printing processes.
Use – Parts and product id, WIP labels, nameplate, graphics used on appliances, industrial equipment, tools, any place that a label needs to be Chemical, Solvent, Salt resistant and abrasion resistant
Material Specification
| Materials | Values |
|---|---|
|
Substrate: |
Polyester |
|
Color: |
Gloss, Clear |
|
Liner: |
40# Bleached Glassine |
|
Top-coat: |
Topcoated |
|
Film: |
1.0 Mil |
|
Adhesive: |
0.5 Mil |
|
Liner: |
3.0 Mil |
|
Total: |
4.5 Mil |
Adhesive Specifications
| Characteristics: | Value |
|---|---|
|
Performance Characteristics: |
Low surface energy substrates, excellent wet-out. Good yellowing resistance |
|
Surfaces: |
Metals, Polypropylene, Glass, LDPE, Many label substrates |
Shelf Life: 1 year at 70 Deg. F ( 21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7103
Paintblock Laminate-Clear Tabs
Description – Ideal for products going through paint, stain, varnish and enamel processes where JIT, WIP or Permanent product marking is required. Cabinets, automotive, tool mfg etc…
Use – Ideal for products going through paint, stain, varnish and enamel processes where JIT, WIP or Permanent product marking is required. Cabinets, automotive, tool mfg etc…
Material Specification
| Materials | Value |
|---|---|
|
Substrate: |
Polyester Overlaminate |
|
Color: |
Matte, Semi-Clear |
|
Liner: |
Self-wounded material No Liner |
|
Top-coat: |
Not Topcoated for printing |
|
Film: |
1.0 Mil |
|
Adhesive: |
0.5 Mil |
|
Liner: |
0.0 Mil |
|
Total: |
1.5 Mil** |
** This total construction of the double layer paintblock is 4.0 Mils – before the top layer is peeled away.
Adhesive Specifications
| Characteristics | Value |
|---|---|
|
Top Layer Characteristics: |
Removable approx. ½ # force required to remove it |
|
Bottom Layer Characteristics: |
Permanent |
|
Surfaces: |
Metals, Polypropylene, Glass, HDPE, LDPE, Many label substrates |
Shelf Life: 1 Year at 70 Deg. F ( 21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7202
Sun Screen Over Laminate
Description – 1 mil clear, self- wound, polyester laminating film provides an excellent solvent and abrasion resistant finish to labels and screens out harmful UV rays. It meets the highest standards of optical clarity, features a water clear emulsion adhesive and is dimensionally stable.
Use – Labels requiring protection from outdoor elements – Parts and product ID, WIP labels, nameplate, graphics used on appliances, industrial equipment, tools, It exhibits excellent resistance to moisture, chemicals, acids, alkali’s, oil, sunlight, weathering and aging.
Material Specification
| Materials | Value |
|---|---|
|
Substrate: |
Polyester |
|
Color: |
Clear gloss |
|
Liner: |
Self-wounded Material – No Liner |
|
Top-coat: |
Not top-coated for printing |
|
Film: |
1.0 Mil |
|
Adhesive: |
0.5 Mil |
|
Liner: |
0.0 Mil |
|
Total: |
1.5 Mil |
Adhesive Specifications
| Characteristics | Value |
|---|---|
|
Characteristics: |
Permanent, Pressure Sensitive |
|
Performance Characteristics: |
UV, Water, Mild Cleaners, Detergents, Alcohol, Moisture, Cold, Chemical, and Abrasion Resistant |
|
Surfaces: |
Metals, Polypropylene, Glass, HDPE, LDPE, Many label substrates |
Shelf Life: 1 year at 70 Deg. F (21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7400
Clear High Temperatur
Polyester Overlaminate
Description – 2 Mil clear, high temperature, polyester self-wound film with a cross linked silicone pressure sensitive adhesive is designed to protect printed information from abrasion, oils, chemicals and solvents on many label substrates.
Use – Ideal for products going through powder coat paint and enamel processes where JIT, WIP or Permanent product marking is required. Cabinets, automotive, tool manufacturing, etc.
Material Specification
| Materials | Value |
|---|---|
|
Substrate: |
Polyester Film |
|
Color: |
gloss |
|
Top-coat: |
Not coated for printing |
|
Film: |
2.0 Mil |
|
Adhesive: |
1.5 Mil |
|
Total: |
3.5 Mil |
Adhesive Specifications
| Characteristics | Value |
|---|---|
|
Performance Characteristics: |
Pressure Sensitive, Permanent |
|
Surfaces: |
Wide variety of label substrate materials |
Shelf Life: 1 Year at 70 Deg. F ( 21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7500
Laminate Polyester – Linered
Description: – 1.3 Mil Matte Polyester Over-laminating Film. The top coat is recommended for optimum durability and thermal transfer printability. The adhesive offers excellent low temperature performance and long term aging for resistance to yellowing in outdoor applications.
Use – Parts and product ID, WIP labels, nameplate, graphics used on appliances, industrial equipment, tools. Topcoated for thermal transfer printability.
Material Specification
Top-coat:Topcoated Thermal TransferTotal:4.6 Mil
| Materials | Value |
|---|---|
|
Substrate: |
Polyester |
|
Color: |
Matte Clear |
|
Liner: |
43# Densified Kraft |
|
Top-coat: |
Not coated for printing |
|
Film: |
1.3 Mil |
|
Adhesive: |
0.8 Mil |
|
Liner: |
2.5 Mil |
Adhesive Specifications
| Characteristics | Value |
|---|---|
|
Characteristics: |
Permanent |
|
Performance Characteristics: |
Mild Cleaners, Detergents, Alcohol, Moisture, Cold, Chemical, and Abrasion Resistant |
|
Surfaces: |
Metals, Polypropylene, Glass, HDPE, LDPE, Many label substrates |
Shelf Life: 2 years at 70 Deg. F ( 21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7501
Description – 2 Mil clear polyester with an acrylic adhesive designed for use in demanding environments. Adhesive offers good UV and moisture resistance. UL recognized for indoor use. File # MH11410 and MH16411
Use – Name Plates, Rating Plate labels and product identification.
Material Specification
| Materials | Value |
|---|---|
|
Substrate: |
2 Mil Polyester |
|
Color: |
Matte, White |
|
Liner: |
50# |
|
Top-coat: |
Thermal Transfer |
|
Film: |
2.0 Mil |
|
Adhesive: |
1.1 Mil |
|
Liner |
3.1 Mil |
|
Total: |
6.2 Mils |
Adhesive Specifications
| Characteristics | Value |
|---|---|
|
Characteristics: |
Pressure Sensitive, Permanent |
|
Pressure Sensitive, Permanent |
LSE Plastics Curved, Rough or Textured surfaces |
Shelf Life: 2 years at 70 Deg. F ( 21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7502
Polyester Clear Top Coated – Linered
Description: – 2.0 Mil clear top-coated polyester. The top coat is recommended for optimum durability and thermal transfer printability. The adhesive offers excellent quick tack and also bonds well to a variety of surfaces including LSE plastics. UL Recognized (file MH11410) and CSA accepted (File 99316)
Use – Parts and product ID, WIP labels, nameplate, graphics used on appliances, industrial equipment, tools. Printable over lamination for variable information.
Material Specification
| Characteristics | Value |
|---|---|
|
Substrate: |
Polyester |
|
Color: |
Matte Clear |
|
Liner: |
55# Densified Kraft |
|
Top-coat: |
Topcoated Thermal Transfer |
|
Film: |
2.0 Mil |
|
Adhesive: |
0.8 Mil |
|
Liner |
3.2 Mil |
|
Total: |
6.0 Mil |
Adhesive Specifications
| Characteristics | Value |
|---|---|
|
Characteristics |
Permanent |
|
Performance Characteristics: |
Mild Cleaners, Detergents, Alcohol, Moisture, Cold, Chemical, and Abrasion Resistant |
|
Surfaces: |
Metals, Polypropylene, Glass, HDPE, LDPE, many surfaces |
Shelf Life: 2 years at 70 Deg. F ( 21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
LML7800
Amber Polyimide Overlaminate
Description – 1 Mil amber polyimide self-wound laminate with silicone pressure sensitive adhesive is designed to protect printed information from heat, abrasion, oils, chemicals and solvents on many label substrates.
Use – Offers optimal performance in electrical and thermal insulation. LML7800 is highly resistant to heat and chemicals, thin and highly conformable. This label is puncture and tear resistant at high temperatures.
Material Specification
| Characteristics | Value |
|---|---|
|
Substrate: |
Polyester Film |
|
Color: |
Gloss, Amber |
|
Top-coat: |
Not coated for printing |
|
Film: |
2.0 Mil |
|
Adhesive: |
1.5 Mil |
|
Total: |
3.5 Mil |
Adhesive Specifications
| Characteristics | Value |
|---|---|
|
Characteristics |
Permanent |
|
Surfaces: |
Wide variety of label substrate materials |
Shelf Life: 1 year at 70 Deg. F ( 21 deg. C) and 50% R.H.
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.
Resources
Our Services
We have a team of highly skilled individuals who are waiting to help you!
Not sure about the material? Worried about auto-apply compatibility? Need
free samples?
Chat with a Label Guru.
Drop Us a Line.
(866) 403-5223
Request A Quote
"*" indicates required fields
Related Articles
Local Label Solutions – 3 New England Producers
From specialty foods, to craft beer and hemp producers, we’ve teamed up with some of the areas most well-known companies.
New FDA Nutrition Facts Label Rules
FDA Nutrition Facts Label requirements are being updated and require companies to modify their food, beverage.
Variable Designs – Perfect For Seasonal Label Printing
With ImageTek Labels state of the art digital printing technology, variable designs are a breeze. Don’t pay extra for custom plate charges.