Matte White Polyart
Description: – 3.2 Mil matte white polyolefin based, clay coated film. Thermal Transfer and Flexo printable.
Double coat weight of aggressive, permanent hot melt pressure sensitive adhesive provides good initial tack and ultimate adhesion to a large variety of hard to label surfaces including wood.
Use: – This product provides superior performance where tear resistance, grease resistance, waterproof and resistance to temperature fluctuation is needed. Not recommended for outdoor exposure longer than 18 months.
|Substrate:||Multi-ply, biaxially – oriented polyart||Film:||3.2 Mil|
|Color:||Matte, White||Adhesive:||2.3 Mil|
|Liner:||50# Silicone coated||Liner:||3.2 Mil|
|Top-coat:||Thermal Transfer, Flexo||Total:||8.7 Mil|
|Type:||Hot Melt Rubber Pressure Sensitive|
|Minimum Application Temperature:||+50 F for maximum adhesion|
|Surfaces:||Irregular Surfaces, Painted Metals, Glass, LSE & HSE Plastics, Rough, Textured and / or Curved, Fabric, Carpet Backing, Wood|
Recommended Ribbons: LWM1000 series
Shelf Life: 1 year when stored at 72 deg. F and 50% RH
Technical specifications are provided for general information only and should not be relied upon for designs and specifications, or be relied on as meeting specified performance criteria. As with all pressure-sensitive materials, this product should be tested thoroughly under end-use conditions to make sure it meets the requirements of the specific application.